Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 238)

188 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
802.1X Port Authentication
9
• Current Identifier– The integer (0-255) used by the Authenticator to identify the current
authentication session.
• Backend State Machine
• State – Current state (including request, response, success, fail, timeout, idle, initialize).
• Request Count– Number of EAP Request packets sent to the Supplicant without receiving
a response.
• Identifier (Server)– Identifier carried in the most recent EAP Success, Failure or Request
packet received from the Authentication Server.
• Reauthentication State Machine
• State – Current state (including initialize, reauthenticate).
Example
Console#show dot1x
Global 802.1X Parameters
System Auth Control : Enabled
Authenticator Parameters:
EAPOL Pass Through : Disabled
Supplicant Parameters:
Identity Profile Username : steve
802.1X Port Summary
Port Type Operation Mode Control Mode Authorized
-------- ------------- -------------- ------------------ ----------
Eth 1/ 1 Disabled Single-Host Force-Authorized Yes
Eth 1/ 2 Disabled Single-Host Force-Authorized Yes
.
.
.
Eth 1/11 Disabled Single-Host Force-Authorized Yes
Eth 1/12 Enabled Single-Host Auto Yes
802.1X Port Details
802.1X Authenticator is enabled on port 1/1
802.1X Supplicant is disabled on port 1/1
.
.
.
802.1X Authenticator is enabled on port 10
Reauthentication : Enabled
Reauth Period : 3600 seconds
Quiet Period : 60 seconds
TX Period : 30 seconds
Supplicant Timeout : 30 seconds
Server Timeout : 10 seconds
Reauth Max Retries : 2
Max Request : 2
Operation Mode : Multi-host
Port Control : Auto
Intrusion Action : Block traffic
Supplicant : 00-e0-29-94-34-65