Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 514)

464 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
IGMP Snooping
23
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on selected options.
Example
The following shows the multicast entries learned through IGMP snooping for VLAN 1.
Console#show ip igmp snooping group vlan 1
Flag: R - Router port, M - Group member port
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of ports join the group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
VLAN Group Port Up time Expire Count
---- --------------- ----------- ----------- ------ --------
1 224.1.1.1 00:00:00:47 1(P)
Eth 1/ 2(M) 0(H)
Eth 1/ 3(M) 0(H)
Console#
show ip igmp snooping statistics
This command shows IGMP snooping protocol statistics for the specified interface.
Syntax
show ip igmp snooping statistics
{input [interface interface] | output [interface interface] | query [vlan vlan-id]}
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
vlan vlan-id - VLAN ID (Range: 1-4093)
query - Displays IGMP snooping-related statistics.
Default Setting
None
Command Mode
Privileged Exec