Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 838)

788 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Automatic Traffic Control
37
• Manual Control Release – Manually releases a control response of rate-limiting or port
shutdown any time after the specified action has been triggered.
Interface
To configure the response timers for automatic storm control:
1. Click Traffic, Auto Traffic Control.
2. Select Configure Interface from the Step field.
3. Enable or disable ATC as required, set the control response, specify whether or not to
automatically release the control response of rate limiting, set the upper and lower thresholds,
and specify which trap messages to send.
4. Click Apply.
FIGURE 136 Configuring ATC Interface Attributes