Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 473)

Brocade 6910 Ethernet Access Switch Configuration Guide 423
53-1002581-01
Priority Commands (Layer 3 and 4)
21
show queue mode
This command shows the current queue mode.
Command Mode
Privileged Exec
Example
Console#show queue mode
Queue Mode : Weighted Round Robin Mode
Console#
show queue weight
This command displays the weights used for the weighted queues.
Command Mode
Privileged Exec
Example
Console#show queue weight
Queue ID Weight
-------- ------
0 1
1 2
2 4
3 6
4 8
5 10
6 12
7 14
Console#
Priority Commands (Layer 3 and 4)
This section describes commands used to configure Layer 3 and 4 traffic priority mapping on the
switch.
TABLE 98 Priority Commands (Layer 3 and 4)
Command Function Mode
qos map cos-dscp Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing IC
qos map dscp-mutation Maps DSCP values in incoming packets to per-hop behavior and drop
precedence values for internal priority processing IC
qos map phb-queue Maps internal per-hop behavior values to hardware queues IC
qos map trust-mode Sets QoS mapping to DSCP or CoS IC
show qos map cos-dscp Shows ingress CoS to internal DSCP map PE
show qos map
dscp-mutation Shows ingress DSCP to internal DSCP map PE