Configuring a list of name servers, Figure 342 confi, Figure 343 s – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 1099
Brocade 6910 Ethernet Access Switch Configuration Guide
1049
53-1002581-01
Domain Name Service
45
Interface
To create a list domain names:
1. Click IP Service, DNS.
2. Select Add Domain Name from the Action list.
3. Enter one domain name at a time.
4. Click Apply.
FIGURE 342
Configuring a List of Domain Names for DNS
To show the list domain names:
1. Click IP Service, DNS.
2. Select Show Domain Names from the Action list.
FIGURE 343
Showing the List of Domain Names for DNS
Configuring a List of Name Servers
Use the IP Service > DNS - General (Add Name Server) page to configure a list of name servers to
be tried in sequential order.
CLI References
•
•
Command Usage
•
To enable DNS service on this switch, configure one or more name servers, and enable domain
lookup status (see
“Configuring General DNS Service Parameters”
•
When more than one name server is specified, the servers are queried in the specified
sequence until a response is received, or the end of the list is reached with no response.