Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 371
Brocade 6910 Ethernet Access Switch Configuration Guide
321
53-1002581-01
Automatic Traffic Control Commands
16
Example
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast control-release
Console(config-if)#
snmp-server enable port-traps atc broadcast-alarm-clear
This command sends a trap when broadcast traffic falls beneath the lower threshold after a storm
control response has been triggered. Use the no form to disable this trap.
Syntax
[no] snmp-server enable port-traps atc broadcast-alarm-clear
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc broadcast-alarm-clear
Console(config-if)#
Related Commands
auto-traffic-control action (317)
auto-traffic-control alarm-clear-threshold (318)
snmp-server enable port-traps atc broadcast-alarm-fire
This command sends a trap when broadcast traffic exceeds the upper threshold for automatic
storm control. Use the no form to disable this trap.
Syntax
[no] snmp-server enable port-traps atc broadcast-alarm-fire
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc broadcast-alarm-fire
Console(config-if)#
Related Commands