Displaying information for dynamic ip source guard, Bindings, Figure 229 s – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 952
902
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
IP Source Guard
41
Displaying Information for Dynamic IP Source Guard Bindings
Use the Security > IP Source Guard > Dynamic Binding page to display the source-guard binding
table for a selected interface.
CLI References
•
“show ip dhcp snooping binding”
Parameters
These parameters are displayed:
Query by
•
Port – A port on this switch.
•
VLAN – ID of a configured VLAN (Range: 1-4093)
•
MAC Address – A valid unicast MAC address.
•
IP Address – A valid unicast IP address, including classful types A, B or C.
Dynamic Binding List
•
VLAN – VLAN to which this entry is bound.
•
MAC Address – Physical address associated with the entry.
•
Interface – Port to which this entry is bound.
•
IP Address – IP address corresponding to the client.
•
Lease Time – The time for which this IP address is leased to the client.
Interface
To display the binding table for IP Source Guard:
1. Click Security, IP Source Guard, Dynamic Binding.
2. Mark the search criteria, and enter the required values.
3. Click Query
FIGURE 229
Showing the IP Source Guard Binding Table