Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 1055)

Brocade 6910 Ethernet Access Switch Configuration Guide 1005
53-1002581-01
OAM Configuration
42
Interface
To enable OAM functionality on the selected port:
1. Click Administration, OAM, Interface.
2. Set the OAM administrative status and operational mode for the required ports. Specify
whether or not critical link events will be reported by the switch. Specify whether errored frame
link events will be reported, as well as the required window size and threshold.
3. Click Apply.
FIGURE 310 Enabling OAM for Local Ports
Displaying Statistics for OAM Messages
Use the Administration > OAM > Counters page to display statistics for the various types of OAM
messages passed across each port.
CLI References
• “show efm oam counters interface” on page 569
Parameters
These parameters are displayed:
• Port – Port identifier. (Range: 1-12)
• Clear – Clears statistical counters for the selected ports.
• OAMPDU – Message types transmitted and received by the OAM protocol, including
Information OAMPDUs, unique Event OAMPDUs, Loopback Control OAMPDUs, and Organization
Specific OAMPDUs.