Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 118
68
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
File Management
5
•
Secure Shell FTP (SFTP) provides a method of transferring files between two network devices
over an SSH2-secured connection. SFTP functions similar to Secure Copy (SCP), using SSH for
user authentication and data encryption.
Although the underlying premises of SFTP are similar to SCP, it requires some additional steps
to verify the protocol versions and perform security checks. SFTP connection setup includes
verification of the DSS signature, creation of session keys, creation of client-server and
server-client ciphers, SSH key exchange, and user authentication. An SFTP channel is then
opened, the SFTP protocol version compatibility verified, and SFTP finally initialized.
Example
The following example shows how to download new firmware from a TFTP server:
Console#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config; 2. opcode; 3. loader: 2
Source file name: m360.bix
Destination file name: m360.bix
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#
The following example shows how to upload the configuration settings to a file on the TFTP server:
Console#copy file tftp
Choose file type:
1. config: 2. opcode: 1
Source file name: startup
TFTP server ip address: 10.1.0.99
Destination file name: startup.01
TFTP completed.
Success.
Console#
The following example shows how to copy the running configuration to a startup file.
Console#copy running-config file
destination file name: startup
Write to FLASH Programming.
\Write to FLASH finish.
Success.
Console#
The following example shows how to download a configuration file:
Console#copy tftp startup-config
TFTP server ip address: 10.1.0.99
Source configuration file name: startup.01
Startup configuration file name [startup]:
Write to FLASH Programming.
\Write to FLASH finish.
Success.
Console#
This example shows how to copy a secure-site certificate from an TFTP server. It then reboots the
switch to activate the certificate:
Console#copy tftp https-certificate