Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 686
636
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Navigating the Web Browser Interface
31
Mirror
Mirrors traffic matching a specified source address from any port on the
switch to a target port
Spanning Tree
Loopback Detection
Configures Loopback Detection parameters
STA
Spanning Tree Algorithm
Configure Global
Configure
Configures global bridge settings for STP, RSTP and MSTP
Show Information
Displays STA values used for the bridge
Configure Interface
Configure
Configures interface settings for STA
Show Inform at on
Displays interface settings for STA
MSTP
Multiple Spanning Tree Algorithm
Configure Global
Add
Configures initial VLAN and priority for an MST instance
Modify
Configures the priority or an MST instance
Show
Configures global settings for an MST instance
Add Member
Adds VLAN members for an MST instance
Show Member
Adds or deletes VLAN members for an MST instance
Show Information
Displays MSTP values used for the bridge
Configure Interface
Configure
Configures interface settings for an MST instance
Show Information
Displays interface settings for an MST instance
Traffic
Rate Limit
Sets the input and output rate limits for a port
Storm Control
Sets the broadcast storm threshold for each interface
Auto Traffic Control
Sets thresholds for broadcast and multicast storms which can be used to
trigger configured rate limits or to shut down a port
Configure Global
Sets the time to apply the control response after traffic has exceeded the
upper threshold, and the time to release the control response after traffic
has fallen beneath the lower threshold
Configure Interface
Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a response of
rate limiting, or to send related SNMP trap messages
Priority
Default Priority
Sets the default priority for each port or trunk
Queue
Sets queue mode for the switch; sets the service weight for each queue
that will use a weighted or hybrid mode
Trust Mode
Selects DSCP or CoS priority processing
TABLE 151
Switch Main Menu (Continued)
Menu
Description
Page