Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 562)

512 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
LLDP Commands
24
lldp basic-tlv system-description
This command configures an LLDP-enabled port to advertise the system description. Use the no
form to disable this feature.
Syntax
[no] lldp basic-tlv system-description
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The system description is taken from the sysDescr object in RFC 3418, which includes the full
name and version identification of the system's hardware type, software operating system, and
networking software.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-description
Console(config-if)#
lldp basic-tlv system-name
This command configures an LLDP-enabled port to advertise the system name. Use the no form to
disable this feature.
Syntax
[no] lldp basic-tlv system-name
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The system name is taken from the sysName object in RFC 3418, which contains the system’s
administratively assigned name, and is in turn based on the
hostname command.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-name
Console(config-if)#