Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 93)

Brocade 6910 Ethernet Access Switch Configuration Guide 43
53-1002581-01
General Commands
4
The ! command repeats commands from the Execution command history buffer when you are in
Normal Exec or Privileged Exec Mode, and commands from the Configuration command history
buffer when you are in any of the configuration modes. In this example, the !2 command repeats
the second command in the Execution history buffer (config).
Console#!2
Console#config
Console(config)#
configure
This command activates Global Configuration mode. You must enter this mode to modify any
settings on the switch. You must also enter Global Configuration mode prior to enabling some of
the other configuration modes, such as Interface Configuration, Line Configuration, and VLAN
Database Configuration. See
“Understanding Command Modes” on page 32.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#configure
Console(config)#
Related Commands
end (44)
disable
This command returns to Normal Exec mode from privileged mode. In normal access mode, you
can only display basic information on the switch's configuration or Ethernet statistics. To gain
access to all commands, you must use the privileged mode. See
“Understanding Command
Modes” on page 32.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
The “>” character is appended to the end of the prompt to indicate that the system is in normal
access mode.
Example
Console#disable
Console>