Web-auth re-authenticate (ip), Show web-auth, Web-auth re-authenticate (ip) show web-auth – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 264

214
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Web Authentication
10
web-auth re-authenticate (IP)
This command ends the web authentication session associated with the designated IP address
and forces the user to re-authenticate.
Syntax
web-auth re-authenticate interface interface ip
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-12)
ip - IPv4 formatted IP address
Default Setting
None
Command Mode
Privileged Exec
Example
Console#web-auth re-authenticate interface ethernet 1/2 192.168.1.5
Console#
show web-auth
This command displays global web authentication parameters.
Command Mode
Privileged Exec
Example
Console#show web-auth
Global Web-Auth Parameters
System Auth Control : Enabled
Session Timeout : 3600
Quiet Period : 60
Max Login Attempts : 3
Console#