Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 1009)

Brocade 6910 Ethernet Access Switch Configuration Guide 959
53-1002581-01
Remote Monitoring
42
• The information collected for each entry includes:
input octets, packets, broadcast packets, multicast packets, undersize packets, oversize
packets, CRC alignment errors, jabbers, fragments, collisions, drop events, and frames of
various sizes.
Parameters
These parameters are displayed:
• Port – The port number on the switch.
• Index - Index to this entry. (Range: 1-65535)
• Owner - Name of the person who created this entry. (Range: 1-127 characters)
Interface
To enable regular sampling of statistics on a port:
1. Click Administration, RMON.
2. Select Configure Interface from the Step list.
3. Select Add from the Action list.
4. Click Statistics.
5. Select a port from the list as the data source.
6. Enter an index number, and the name of the owner for this entry
7. Click Apply
FIGURE 276 Configuring an RMON Statistical Sample
To show configured RMON statistical samples:
1. Click Administration, RMON.
2. Select Configure Interface from the Step list.
3. Select Show from the Action list.
4. Select a port from the list.
5. Click Statistics.