Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 1003)

Brocade 6910 Ethernet Access Switch Configuration Guide 953
53-1002581-01
Remote Monitoring
42
• Owner – Name of the person who created this entry. (Range: 1-127 characters)
Interface
To configure an RMON alarm:
1. Click Administration, RMON.
2. Select Configure Global from the Step list.
3. Select Add from the Action list.
4. Click Alarm.
5. Enter an index number, the MIB object to be polled (etherStatsEntry.n.n), the polling interval,
the sample type, the thresholds, and the event to trigger.
6. Click Apply
FIGURE 269 Configuring an RMON Alarm
To show configured RMON alarms:
1. Click Administration, RMON.
2. Select Configure Global from the Step list.
3. Select Show from the Action list.
4. Click Alarm.