Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 537)

Brocade 6910 Ethernet Access Switch Configuration Guide 487
53-1002581-01
MVR for IPv4
23
show mvr members
This command shows information about the current number of entries in the forwarding database,
detailed information about a specific multicast address, the IP address of the hosts subscribing to
all active multicast groups, or the multicast groups associated with each port.
Syntax
show mvr [domain domain-id] members [ip-address |
host-ip-address [interface] | sort-by-port [interface]]]
domain-id - An independent multicast domain. (Range: 1-5)
ip-address - IPv4 address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
members - The multicast groups assigned to the MVR VLAN.
host-ip-address - The subscriber IP addresses.
sort-by-port - The multicast groups associated with an interface.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
Default Setting
Displays configuration settings for all domains and all forwarding entries.
Command Mode
Privileged Exec
Example
The following shows information about the number of multicast forwarding entries currently active
in domain 1:
Console#show mvr domain 1 members
MVR Domain : 1
MVR Forwarding Entry Count :1
Console#
The following example shows detailed information about a specific multicast address:
Console#show mvr domain 1 members 234.5.6.7
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of ports join the group).
Uptime: Group elapsed time; Expire: Group remain time.