Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 1114)

1064 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Layer 2 IGMP (Snooping and Query)
46
Interface
To specify a static interface attached to a multicast router:
1. Click Multicast, IGMP Snooping, Multicast Router.
2. Select Add Static Multicast Router from the Action list.
3. Select the VLAN which will forward all the corresponding multicast traffic, and select the port
or trunk attached to the multicast router.
4. Click Apply.
FIGURE 354 Configuring a Static Interface for a Multicast Router
To show the static interfaces attached to a multicast router:
1. Click Multicast, IGMP Snooping, Multicast Router.
2. Select Show Static Multicast Router from the Action list.
3. Select the VLAN for which to display this information.
FIGURE 355 Showing Static Interfaces Attached a Multicast Router
To show the all interfaces attached to a multicast router:
1. Click Multicast, IGMP Snooping, Multicast Router.
2. Select Current Multicast Router from the Action list.