Ip scalar variables, Ipv4interfacetable, Ipv6interfacetable – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 86: Ipsystemstatstable, Ipifstatstablelastchange, Ipifstatstable, Ipaddressprefixtable, Ipaddresstable, Ipnettophysicaltable, Ipv6scopezoneindextable

58
Unified IP MIB Reference
53-1002549-02
RFC 4293: Management Information Base for the Internet Protocol (IP)
RFC 4293: Management Information Base for the
Internet Protocol (IP)
RFC 4293, Management Information Base for the Internet Protocol (IP) obsoletes the following:
•
RFC 2011: SNMPv2 Management Information Base for the Internet Protocol using SMIv2
•
RFC 2465: Management Information Base for IP Version 6: Textual Conventions and General
Group
•
RFC 2466: Management Information Base for IP Version 6: ICMPv6 Group
This RFC is supported on the Brocade NetIron XMR, Brocade NetIron MLX, Brocade MLXe, Brocade
NetIron CES, and Brocade NetIron CER series devices.
The following table summarizes the tables from the RFC that are supported.
Object group name
Object identifier
Supported IP
version
Access
IP scalar variables
1.3.6.1.2.1.4
IPv4 and IPv6
Only the following objects have
read-write access:
•
ipDefaultTTL
•
ipv6IpDefaultHopLimit
•
ipv6IpForwarding
All other scalar variables are
read-only.
ipv4InterfaceTable
1.3.6.1.2.1.4.28
IPv4
All objects are read-only.
ipv6InterfaceTable
1.3.6.1.2.1.4.30
IPv6
All objects are read-only.
ipSystemStatsTable
1.3.6.1.2.1.4.31.1 IPv4 and IPv6
All objects are read-only.
ipIfStatsTableLastChange
1.3.6.1.2.1.4.31.2 IPv4 and IPv6
All objects are read-only.
ipIfStatsTable
1.3.6.1.2.1.4.31.3 IPv4 and IPv6
Not supported.
ipAddressPrefixTable
1.3.6.1.2.1.4.32
IPv4 and IPv6
All objects are read-only.
ipAddressTable
1.3.6.1.2.1.4.34
IPv4 and IPv6
All objects are read-only.
ipNetToPhysicalTable
NOTE: Only ARP entries that are
currently being used are
included in the ARP table.
1.3.6.1.2.1.4.35
IPv4 and IPv6
Only the following objects have
read-create access:
•
ipNetToPhysicalPhysAddress
•
ipNetToPhysicalType
•
ipNetToPhysicalRowStatus
All other objects are read-only.
ipv6ScopeZoneIndexTable
1.3.6.1.2.1.4.36
IPv6
All objects are read-only
ipDefaultRouterTable
1.3.6.1.2.1.4.37
IPv4 and IPv6
All objects are read-only.