Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 48)

20 Unified IP MIB Reference
53-1002549-02
RFC 2863: The Interfaces Group MIB
ifXTable attributes
The following MIB attributes of the ifXTable return information for switched and routed packets for
the 8x10 modules.
Preserved SNMP statistics on interfaces
SNMP statistics in the ifTable and ifXTable for physical interfaces on Brocade MLXe and NetIron
devices are preserved when the snmp-server preserve-statistics command is configured. After
configuring snmp-server preserve-statistics, the SNMP statistics listed in the following tables are
separated from the CLI statistics. When the clear statistics
command is entered on the CLI, the command clears only CLI statistics, leaving the SNMP
statistics intact.
ifInNUcastPkts Yes No No No No Yes
ifInDiscards Yes No No No No Yes
ifInErrors Yes No No No No Yes
ifInUnknownProtos Yes No No No No Yes
ifOutNUcastPkts Yes No No No No Yes
ifOutDiscards Yes No No No No Yes
ifOutErrors Yes No No No No Yes
ifOutQLen Yes No No No No Yes
MIB attribute Physical Virtual Loopback IP tunnel MPLS
tunnel Trunk
ifHCInOctets Yes Yes No No No Yes
ifHCOutOctets Yes Yes No Yes Yes Yes
ifHCInUcastPkts Yes Yes No Yes No Yes
ifHCOutUcastPkts Yes Yes No Yes Yes Yes
ifInMulticastPkts Yes No No No No Yes
ifInBroadcastPkts Yes No No No No Yes
ifOutMulticastPkts Yes No No No No Yes
ifOutBroadcastPkts Yes No No No No Yes
ifHCInMulticastPkts Yes No No No No Yes
ifHCInBroadcastPkts Yes No No No No Yes
ifHCOutMulticastPkts Yes No No No No Yes
ifHCOutBroadcastPkts Yes No No No No Yes
MIB attribute Physical Virtual Loopback IP tunnel MPLS
tunnel Trunk