Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 590)

562 Unified IP MIB Reference
53-1002549-02
PIM virtual interface statistics table
PIM virtual interface statistics table
The PIM virtual interface statistics table lists the PIM virtual interface statistical counters of the
Layer 3 Switch.
NOTE
This PIM virtual interface statistics table is not supported on the Brocade MLXe router, Brocade
NetIron MLX, Brocade NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
Name, OID, and syntax Access Description
snPimNeighborTable
brcdIp.1.2.9.1.8 None The PIM neighbor table.
snPimNeighborEntryIndex
brcdIp.1.2.9.1.8.1.1
Syntax: Integer32 Read-only The table entry index.
snPimNeighborVifIndex
brcdIp.1.2.9.1.8.1.2
Syntax: Integer32 Read-only Shows the value of VifIndex for the virtual interface used
to reach this PIM neighbor.
snPimNeighborAddress
brcdIp.1.2.9.1.8.1.3
Syntax: IpAddress Read-only Shows the IP address of this PIM neighbor.
snPimNeighborUpTime
brcdIp.1.2.9.1.8.1.4
Syntax: Time ticks Read-only Indicates the last time this PIM neighbor became a
neighbor of the local Layer 3 Switch.
snPimNeighborExpiryTime
brcdIp.1.2.9.1.8.1.5
Syntax: Time ticks Read-only Displays the time remaining before this PIM neighbor will
be aged out.
Name, OID, and syntax Access Description
snPimVIfStatTable
brcdIp.1.2.9.1.9 None The PIM virtual interface statistics table.
snPimVIfStatVifIndex
brcdIp.1.2.9.1.9.1.1
Syntax: Integer Read-only The ifIndex value of this PIM virtual interface. There can be
32 entries.
Valid values: 1 - 32
snPimVIfStatInJoinPkts
brcdIp.1.2.9.1.9.1.2
Syntax: Counter32 Read-only Shows the number of join and prune messages sent or
received on the interface.
NOTE: Unlike PIM Dense, PIM Sparse uses the same
messages for joins and prunes.
snPimVIfStatOutJoinPkts
brcdIp.1.2.9.1.9.1.3
Syntax: Counter32 Read-only Indicates the number of join packets that have been sent
on the PIM virtual interface.
snPimVIfStatDiscardJoinPkts
brcdIp.1.2.9.1.9.1.4
Syntax: Counter32 Read-only Shows the number of join packets that have been
discarded by the PIM virtual interface.