Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 353)

Unified IP MIB Reference 325
53-1002549-02
Chapter
27
Trunk Port Configuration Group
In this chapter
• Trunk port configuration group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
• Multi-slot trunk port table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
• Switch configuration summary group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Trunk port configuration group
The trunk group feature allows you to manually configure multiple high-speed, load-sharing links
between two switches or routers or between a switch and router and a server.
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron XMR, Brocade
NetIron MLX, Brocade NetIron CES, and Brocade NetIron CER series devices.
The following objects contain configuration of trunk port memberships.
Multi-slot trunk port table
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
The following table applies to multi-slot trunk ports. The objects show the ports that are members
of a trunk group and they apply to all devices unless otherwise specified in their descriptions.
Name, OID, and syntax Access Description
snTrunkTable
brcdIp.1.1.3.6.1 None The trunk port table. A specific snTrunkTable consists of a number
of trunk port masks.
snTrunkIndex
brcdIp.1.1.3.6.1.1.1
Syntax: Integer32 Read-only Shows the number of the trunk port entries that can be
configured.
Valid values: 1 – 64
snTrunkPortMask
brcdIp.1.1.3.6.1.1.2
Syntax: PortMask Read-write Shows the trunk port membership of the switch.
snTrunkType
brcdIp.1.1.3.6.1.1.3
Syntax: Integer Read-write Indicates if the trunk port is connected to a switch or a server:
•
switch(1)
•
server(2)