Ifname, Ifinmulticastpkts, Ifinbroadcastpkts – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 76: Ifoutmulticastpkts, Ifoutbroadcastpkts, Ifhcinoctets, Ifhcinucastpkts, Ifhcinbroadcastpkts, Ifhcoutoctets, Ifhcoutucastpkts

48
Unified IP MIB Reference
53-1002549-02
RFC 4113: Management Information Base for the User Datagram Protocol (UDP)
RFC 4113: Management Information Base for the
User Datagram Protocol (UDP)
RFC 4113, Management Information Base for the User Datagram Protocol (UDP) is supported on
the Brocade NetIron XMR, Brocade NetIron MLX, Brocade MLXe, Brocade NetIron CES, and
Brocade NetIron CER series devices.
All objects have read-only access.
RFC 4273: Definitions of Managed Objects for BGP-4
RFC 4273 is supported on the Brocade NetIron XMR, Brocade NetIron MLX, Brocade MLXe,
Brocade NetIron CES, and Brocade NetIron CER series devices.
NOTE
The definitions of managed objects for BGP-4 (OID 1.3.6.1.2.1.15.3) is used instead of RFC 1567,
Definitions of Managed Objects for the Fourth Version of the Border Gateway Protocol (BGP-4) using
SMIv2. RFC 1657 has been obsoleted in RFC 4273.
Object names
Description
ifName
Read-only.
ifInMulticastPkts
Read-only. Returns 0.
ifInBroadcastPkts
Not supported. Returns 0.
ifOutMulticastPkts
Read-only. Returns 0.
ifOutBroadcastPkts
Not supported. Returns 0.
ifHCInOctets
Not supported. Returns 0.
ifHCInUcastPkts
Read-only. Reports total received packet count from tunnel.
ifHCInBroadcastPkts
Not supported. Returns 0.
ifHCOutOctets
Not supported. Returns 0.
ifHCOutUcastPkts
Read-only. Reports total received packet count from tunnel.
ifHCOutMulticastPkts
Not supported. Returns 0.
ifHCOutBroadcastPkts
Not supported. Returns 0.
ifLinkUpDownTrapEnable
Read-only. Always returns disabled(2).
ifHighSpeed
Not supported. Returns 0.
ifPromiscuousMode
Read-only. Always returns true(1).
ifConnectorPresent
Read-only. Always returns false(2).
ifAlias
Read-only.
ifCounterDiscontinuityTime
Read-only.