Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 740)

712 Unified IP MIB Reference
53-1002549-02
Proprietary traps
SNMP traps for RSVP-signaled LSP state
SNMP traps that identify when an RSVP-signaled LSP goes up and down and also when an LSP
switches traffic to a new active path are available on the Brocade MLXe and Brocade NetIron XMR
devices.
Trap name and number Varbinds Severity Description and trap message
snTrapAutoPortDisableTrigg
er
brcdIp.0.123
NOTE: This object is not
supported on
Brocade NetIron
MLX, Brocade MLXe,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron CER
series devices.
snAgGblTrapMessage Notification The specified interface has been
deactivated and disabled.
Sample trap message:
Automatic port disable was
triggered at port
snTrapAutoPortDisableRelea
se
brcdIp.0.124
NOTE: This object is not
supported on
Brocade NetIron
MLX, Brocade MLXe,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron CER
series devices.
snAgGblTrapMessage Notification The disabled interface has been released
and re-enabled.
Sample trap message:
Automatic port disable was
released at port
Trap name and number Varbinds Severity Description
snMplsLspUp
brcdIp.0.139 mplsLspName
mplsLspPathN
ame Informational Informs that the specified RSVP-signaled LSP
using the specified active path is up.
snMplsLspUp
brcdIp.0.140 mplsLspName
mplsLspPathN
ame Informational Informs that the specified RSVP-signaled LSP is
down because the current active path went
down.
snMplsLspChange
brcdIp.0.141 mplsLspName
mplsLspPathN
ame Informational Informs that the specified RSVP-signaled LSP
has switched traffic to the specified new active
path. The LSP maintains an up state before
and after the switchover.