Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 241)

Unified IP MIB Reference 213
53-1002549-02
Interface media information table
Interface media information table
The following table shows the information of the media device installed in the physical ports.
These objects retrieve information from the output of the show media command.
Loopback interface configuration table
The following table lists the objects that are supported on the Brocade NetIron MLX, Brocade MLXe
router, and Brocade NetIron XMR devices.
snIfOpticalLaneMonitoringRx
Power
brcdIp.1.1.3.3.10.1.1
Syntax: DisplayString Read-only This object holds the value of the receiver optical signal power for
the lane in the interface, measured in dBm, followed by whether
this is a normal value, or high/low warning or alarm.
snIfOpticalLaneMonitoringTx
BiasCurrent
brcdIp.1.1.3.3.10.1.1
Syntax: DisplayString Read-only The Tx Bias Current. It is measured in mA, and is followed by
whether this is a normal value, or high/low warning or alarm.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snIfMediaInfoTable
brcdIp.1.1.3.3.9 None The information of the media device (SFP/XFP/Copper) installed
in the physical port. Only the ifIndices of Ethernet ports that are
associated with the operational cards are included in this table.
snIfMediaType
brcdIp.1.1.3.3.9.1.1
Syntax: Display string Read-only The type of the media installed in the physical port.
snIfMediaVendorName
brcdIp.1.1.3.3.9.1.2
Syntax: Display string Read-only The media vendor name (full name of the corporation).
snIfMediaVersion
brcdIp.1.1.3.3.9.1.3
Syntax: Display string Read-only The media vendor product version number.
snIfMediaPartNumber
brcdIp.1.1.3.3.9.1.4
Syntax: Display string Read-only The media vendor part number.
snIfMediaSerialNumber
brcdIp.1.1.3.3.9.1.5
Syntax: Display string Read-only The vendor serial number of the media device.