Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 57)

Unified IP MIB Reference 29
53-1002549-02
RFC 2934: Protocol Independent Multicast MIB for IPv4
RFC 2934: Protocol Independent Multicast MIB for IPv4
Support on FastIron devices
FastIron devices support the following objects from RFC 2934. FastIron devices do not support PIM
Border.
pimInterfaceTable (PIM interface table)
Object Object identifier Supported?
igmpCacheAddress 1.3.6.1.2.1.85.1.2.1.1 Yes
igmpCacheIfIndex 1.3.6.1.2.1.85.1.2.1.2 Yes
igmpCacheSelf 1.3.6.1.2.1.85.1.2.1.3 Yes, but read-only.
igmpCacheLastReporter 1.3.6.1.2.1.85.1.2.1.4 Yes, but read-only.
NOTE: On Brocade NetIron MLX
,
Brocade MLXe , Brocade
NetIron XMR , Brocade
NetIron CES, and Brocade
NetIron CER series
devices,
the constant value for this
object is 0.
igmpCacheUpTime 1.3.6.1.2.1.85.1.2.1.5 Yes, but read-only.
igmpCacheExpiryTime 1.3.6.1.2.1.85.1.2.1.6 Yes, but read-only.
igmpCacheStatus 1.3.6.1.2.1.85.1.2.1.7 Yes, but read-only.
NOTE: On Brocade NetIron MLX
,
Brocade MLXe , Brocade
NetIron XMR , Brocade
NetIron CES, and Brocade
NetIron CER series
devices,
the constant value for this
object is active(1).
igmpCacheVersion1HostTimer 1.3.6.1.2.1.85.1.2.1.8 Yes, but read-only.
Object Object identifier
pimJoinPruneInterval 1.3.6.1.3.61.1.1.1
Object Object identifier
pimInterfaceIfIndex 1.3.6.1.3.61.1.1.2.1.1
pimInterfaceAddress 1.3.6.1.3.61.1.1.2.1.2
pimInterfaceNetMask 1.3.6.1.3.61.1.1.2.1.3
pimInterfaceMode 1.3.6.1.3.61.1.1.2.1.4
pimInterfaceDR 1.3.6.1.3.61.1.1.2.1.5