Port mac security interface table, Snportmacsecurityintfcontenttable, Snportmacsecurityintfcontentifinde x – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 381: Snportmacsecurityintfcontentsecur ity, Snportmacsecurityintfcontentviolat iontype, Snportmacsecurityintfcontentshut downtime, Snportmacsecurityintfcontentshut downtimeleft, Snportmacsecurityintfcontentageo uttime, Snportmacsecurityintfcontentmaxl ockedmacallowed, Snportmacsecurityintfcontenttotal macs

Unified IP MIB Reference
353
53-1002549-02
Port MAC security interface table
Port MAC security interface table
The following table shows the same information as the show port security ethernet
command.
Name, OID, and syntax
Access
Description
snPortMacSecurityIntfContentTable
brcdIp.1.1.3.24.1.1.3
None
The port MAC security interface table that shows the port MAC
security statistics for an Ethernet interface.
snPortMacSecurityIntfContentIfInde
x
brcdIp.1.1.3.24.1.1.3.1.1
Syntax: InterfaceIndex
None
Shows the ifIndex value of the local interface.
snPortMacSecurityIntfContentSecur
ity
brcdIp.1.1.3.24.1.1.3.1.2
Syntax: Integer
Read- write
Indicates whether MAC port security is enabled or disabled on
this interface:
•
disabled(0)
•
enabled(1)
snPortMacSecurityIntfContentViolat
ionType
brcdIp.1.1.3.24.1.1.3.1.3
Syntax: Integer
Read-write
The port security violation type for this interface:
•
shutdown(0)
•
restricted(1)
snPortMacSecurityIntfContentShut
downTime
brcdIp.1.1.3.24.1.1.3.1.4
Syntax: Unsigned32
Read-write
If snPortMacSecurityIntfContentViolationType is 0 (shutdown),
this value indicates the number of seconds the interface shuts
down when the violation occurs.
If snPortMacSecurityIntfContentViolationType is 1 (restrict),
this value will always be 0.
snPortMacSecurityIntfContentShut
downTimeLeft
brcdIp.1.1.3.24.1.1.3.1.5
Syntax: Unsigned32
Read-only
If snPortMacSecurityIntfContentViolationType is 0 (shutdown),
this value indicates the number of seconds before this
interface will be re-enabled.
If snPortMacSecurityIntfContentViolationType is 1 (restrict),
this value will always be 0.
snPortMacSecurityIntfContentAgeO
utTime
brcdIp.1.1.3.24.1.1.3.1.6
Syntax: Unsigned32
Read-write
The amount of time, in minutes, the MAC addresses learned
on this interface will remain secure. A value of 0 indicates no
aging is in effect.
snPortMacSecurityIntfContentMaxL
ockedMacAllowed
brcdIp.1.1.3.24.1.1.3.1.7
Syntax: Unsigned32
Read-write
The maximum number of secure MAC addresses that can be
locked to this interface.
snPortMacSecurityIntfContentTotal
MACs
brcdIp.1.1.3.24.1.1.3.1.8
Syntax: Unsigned32
Read-only
The total number of secure MAC addresses that are locked to
this interface.
snPortMacSecurityIntfContentViolat
ionCounts
brcdIp.1.1.3.24.1.1.3.1.9
Syntax: Unsigned32
Read-only
The total number of security violations that occurred on this
interface.