Traps for wireless features, Sntrapwirelessstationstatec hange, Sntrapwirelesssappstatech ange – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 738: Wireless feature traps, Wireless mobility traps

710
Unified IP MIB Reference
53-1002549-02
Proprietary traps
Traps for wireless features
NOTE
The traps in the following sections are available on devices that support the wireless features, such
as automatic discovery and configuration (ADC), wireless mobility, and others.
Wireless feature traps
The WLAN controller generates the following general traps for wireless feature support. Refer to the
specific wireless feature sections to determine what traps are generated for each feature.
Wireless mobility traps
The following traps are generated by the WLAN controller for wireless mobility.
Trap name and number
Varbinds
Severity
Description and trap message
snTrapWirelessStationStateC
hange
brcdIp.0.127
NOTE: This object is not
supported on
Brocade NetIron
MLX, Brocade MLXe,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron CER
series devices.
snAgGblTrapMessage
Notification
The state of the wireless station (client)
that is associated with this WLAN
controller through the access point has
changed.
Sample trap message:
removed
snTrapWirelessSappStateCh
ange
brcdIp.0.129
NOTE: This object is not
supported on
Brocade NetIron
MLX, Brocade MLXe,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron CER
series devices.
snAgGblTrapMessage
Notification
The state of the communication between
an access point and this WLAN controller
has changed.
Sample trap message:
state from
to