Snvrrpifrxauthpwdmism atcherrcnts, Snvrrpifrxvriderrcnts, Vrrp and vrrp-e interface table – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 439: Snvrrpif2table, Snvrrpif2authtype, Snvrrpif2authpassword, Snvrrpif2rxheadererrcnts, Snvrrpif2rxauthtypeerrcnts, Snvrrpif2rxauthpwdmismatc herrcnts, Snvrrpif2rxvriderrcnts

Unified IP MIB Reference
411
53-1002549-02
VRRP and VRRP-E interface table
VRRP and VRRP-E interface table
The following table replaces the
section),
which uses the slot or port number to index an entry. This table uses the ifindex to present the
configuration and statistics of VRRP and VRRP-E interfaces. Each entry in the table describes one
VRRP or VRRP-E interface.
VRRP virtual router table
The following table has been replaced by the
. The new table is presented in
“VRRP and VRRP-E virtual router configuration table”
.
snVrrpIfRxAuthPwdMism
atchErrCnts
brcdIp.1.2.12.2.1.1.6
Syntax: Counter32
Read-only
Shows the number of VRRP or VRRP-E packets received by the interface
that had a password value that does not match the password used by
the interface for authentication.
snVrrpIfRxVridErrCnts
brcdIp.1.2.12.2.1.1.7
Syntax: Counter32
Read-only
Shows the number of VRRP or VRRP-E packets received by the interface
that contained a VRID that is not configured on this interface.
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
snVrrpIf2Table
brcdIp.1.2.12.4.1
None
The VRRP and VRRP-E table for interfaces, using the ifindex.
snVrrpIf2AuthType
brcdIp.1.2.12.4.1.1.1
Syntax: Integer
Read-write The authentication type of the interface:
•
noAuth(0)
•
simpleTextPasswd(1)
•
ipAuthHeader(2)
snVrrpIf2AuthPassword
brcdIp.1.2.12.4.1.1.2
Syntax: OCTET STRING
Read-write Password for the interface if the snVrrpIf2AuthType type is set to
simpleTextPasswd(1).
snVrrpIf2RxHeaderErrCnts
brcdIp.1.2.12.4.1.1.3
Syntax: Counter32
Read-only
The number of packets received by the interface that had a header
error.
snVrrpIf2RxAuthTypeErrCnts
brcdIp.1.2.12.4.1.1.4
Syntax: Counter32
Read-only
The number of packets received by the interface that had an
authentication error.
snVrrpIf2RxAuthPwdMismatc
hErrCnts
brcdIp.1.2.12.4.1.1.5
Syntax: Counter32
Read-only
The number of packets received by the interface that had a password
value that does not match the password used by the interface for
authentication.
snVrrpIf2RxVridErrCnts
brcdIp.1.2.12.4.1.1.6
Syntax: Counter32
Read-only
The number of packets received by the interface that contained a
VRID that is not configured on this interface.