Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 295)

Unified IP MIB Reference 267
53-1002549-02
Stacking operation unit table
Stacking operation unit table
Use the following table to display information about the role and status of a unit in a stack.
snStackingConfigUnitRowSt
atus
brcdIp.1.1.3.31.2.1.1.4
Syntax: Integer Read-write This object is used to delete a row in the table and control if they are
used. The following values can be written for a SET:
•
delete(3) - Deletes the row. Deleted rows are deleted
immediately.
The following values can be returned on reads:
•
noSuchName - No such row
•
other(1) - Some other cases
•
valid(2) - The row exists and is valid
snStackingConfigUnitType
brcdIp.1.1.3.31.2.1.1.5
Syntax: DisplayString Read-only A description of the configured or active system type for each unit.
snStackingConfigUnitState
brcdIp.1.1.3.31.2.1.1.6
Syntax: Integer Read-only The state of the unit:
•
local(1)
•
remote(2)
•
reserved(3)
•
empty(4)
snStackingConfigUnitStackP
ort1
brcdIp.1.1.3.31.2.1.1.7
Syntax: InterfaceIndex Read-only First stack port for each unit. It returns 0 if the stack port does not
exist.
snStackingConfigUnitStackP
ort2
brcdIp.1.1.3.31.2.1.1.8
Syntax: InterfaceIndex or
zero Read-only Second stack port for each unit. It returns 0 if the stack port does not
exist.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snStackingOperUnitTable
brcdIp.1.1.3.31.2.2 None Stacking operation unit table.
snStackingOperUnitIndex
brcdIp.1.1.3.31.2.2.1.1
Syntax: Integer None ID of the unit in the stack.
snStackingOperUnitRole
brcdIp.1.1.3.31.2.2.1.2
Syntax: Integer Read-only The role of the unit:
•
other(1)
•
active(2)
•
standby(3)
•
member(4)
•
standalone(5)
snStackingOperUnitMac
brcdIp.1.1.3.31.2.2.1.3
Syntax: MAC address Read-only The unit’s MAC address.