Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 58)

30 Unified IP MIB Reference
53-1002549-02
RFC 2934: Protocol Independent Multicast MIB for IPv4
pimNeighborTable (PIM neighbor table)
pimComponentTable (PIM component table)
Support on other devices
RFC 2934 is supported on the following other Brocade devices:
• Brocade NetIron XMR devices
• Brocade NetIron MLX devices
• Brocade MLXe devices
• Brocade NetIron CES and Brocade NetIron CER series devices
NOTE
On the Brocade NetIron XMR, Brocade NetIron MLX, Brocade NetIron CES, and Brocade NetIron CER
series devices, only default VRF is supported.
Support for RFC 2934 in these devices is presented in the following sections.
pimInterfaceTable (PIM interface table)
Use the show ip pim interface command to display information about the PIM interface table.
The SET request is not supported for this table.
pimInterfaceHelloInterval 1.3.6.1.3.61.1.1.2.1.6
pimInterfaceStatus 1.3.6.1.3.61.1.1.2.1.7
pimInterfaceJoinPruneInterval 1.3.6.1.3.61.1.1.2.1.8
pimInterfaceCBSRPreference 1.3.6.1.3.61.1.1.2.1.9
Object Object identifier
pimNeighborAddress 1.3.6.1.3.61.1.1.3.1.1
pimNeighborIfIndex 1.3.6.1.3.61.1.1.3.1.2
Object Object identifier
pimComponentIndex 1.3.6.1.3.61.1.1.12.1.1
pimComponentBSRAddress 1.3.6.1.3.61.1.1.12.1.2
pimComponentBSRExpiryTime 1.3.6.1.3.61.1.1.12.1.3
Object Object identifier Supported?
pimJoinPruneInterval 1.3.6.1.3.61.1.1.1 Yes, but read-only.
Object Object identifier