Pimrpgroupaddress, Pimrpaddress, Pimrpstate – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 61: Pimrpstatetimer, Pimrplastchange, Pimrprowstatus, Pimrpsettable (pim rp set table), Pimrpsetgroupaddress, Pimrpsetgroupmask, Pimrpsetaddress

Unified IP MIB Reference
33
53-1002549-02
RFC 2934: Protocol Independent Multicast MIB for IPv4
pimRpSetTable (PIM RP set table)
Use the show ip pim rp-set command to display information about the PIM RP set table.
pimCandidateRPTable (PIM candidate-RP table)
The show ip pim bsr command displays information about the PIM candidate-RP table.
pimComponentTable (PIM component table)
This table contain objects specific to PIM domain and has only one row for each domain to which
the router is connected.
Use the ip pim border CLI command at the interface level to stop the flooding of the bootstrap
messages.
The show ip pim bsr command displays information about the PIM component table.
Object
Object identifier
Supported?
pimRPGroupAddress
1.3.6.1.3.61.1.1.5.1.1
Yes, but read-only and only active groups.
pimRPAddress
1.3.6.1.3.61.1.1.5.1.2
Yes, but read-only.
pimRPState
1.3.6.1.3.61.1.1.5.1.3
Yes, but read-only and value is always up(1).
pimRPStateTimer
1.3.6.1.3.61.1.1.5.1.4
No.
pimRPLastChange
1.3.6.1.3.61.1.1.5.1.5
No.
pimRPRowStatus
1.3.6.1.3.61.1.1.5.1.6
Yes, but read-only.
Object
Object identifier
Supported?
pimRpSetGroupAddress
1.3.6.1.3.61.1.1.6.1.1
Yes
pimRpSetGroupMask
1.3.6.1.3.61.1.1.6.1.2
Yes
pimRpSetAddress
1.3.6.1.3.61.1.1.6.1.3
Yes
pimRpSetHoldTime
1.3.6.1.3.61.1.1.6.1.4
Yes, but read-only.
pimRpSetExpiryTime
1.3.6.1.3.61.1.1.6.1.5
Yes, but read-only.
pimRpSetComponent
1.3.6.1.3.61.1.1.6.1.6
Yes, but only one PIM domain is
supported.
Object
Object identifier
Supported?
pimCandidateRPGroupAddress
1.3.6.1.3.61.1.1.11.1.1
Yes
pimCandidateRPGroupMask
1.3.6.1.3.61.1.1.11.1.2
Yes.
pimCandidateRPAddress
1.3.6.1.3.61.1.1.11.1.3
Yes, but read-only.
pimCandidateRPRowStatus
1.3.6.1.3.61.1.1.11.1.4
Yes, but read-only. Returns “active”.