Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 55)

Unified IP MIB Reference 27
53-1002549-02
RFC 2933: Internet Group Management Protocol MIB
RFC 2933: Internet Group Management Protocol MIB
Support on FastIron devices
FastIron devices support the following objects from RFC 2933.
igmpInterfaceTable (IGMP interface table)
igmpCacheTable (IGMP cache table)
Support on other devices
RFC 2933 is supported on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron XMR,
Brocade NetIron CES, and Brocade NetIron CER series devices:
The following limitations apply to the support of RFC 2933 on the Brocade MLXe devices:
• IGMP Snooping is not supported.
• Tables are read-only.
• VRF support is only for the default VRF.
• Data is available only for physical ports.
igmpInterfaceTable (IGMP interface table)
The show ip igmp interface command is used to display information about the IGMP interface table.
The SET request is not supported for this table.
Object Object identifier
igmpInterfaceStatus 1.3.6.1.2.1.85.1.1.1.3
igmpInterfaceQuerier 1.3.6.1.2.1.85.1.1.1.5
Object Object identifier
igmpCacheSelf 1.3.6.1.2.1.85.1.2.1.3
igmpCacheLastReporter 1.3.6.1.2.1.85.1.2.1.4
igmpCacheStatus 1.3.6.1.2.1.85.1.2.1.7
Object Object identifier Supported?
igmpInterfaceIfIndex 1.3.6.1.2.1.85.1.1.1.1 Yes
igmpInterfaceQueryInterval 1.3.6.1.2.1.85.1.1.1.2 Yes, but read-only