Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 258)

230 Unified IP MIB Reference
53-1002549-02
Software licensing
Interface module auto-upgrade objects
The following objects are for configuring the interface module auto-upgrade process for the
Brocade NetIron devices.
Name, OID, and syntax Access Description
brcdSwPackageLoadResultTa
ble
brcdIp.1.1.2.16.1.5 None Contains the summary of the upgrade operation.
brcdSwPackageUpgradeResu
ltIndex
brcdIp.1.1.2.16.1.5.1.1
Syntax: Unsigned32 None Specifies the sequential index or upgrade step.
brcdSwPackageUpgradeResu
ltImageType
brcdIp.1.1.2.16.1.5.1.2
Syntax: BrcdImageType Read-only Specifies the associated image type for the step of the
upgrade process.
brcdSwPackageUpgradeResu
ltStatus
brcdIp.1.1.2.16.1.5.1.3
Syntax: Integer Read-only Indicates the upgrade status for the particular image
upgrade.
brcdSwPackageUpgradeResu
ltTimeStamp
brcdIp.1.1.2.16.1.5.1.4
Syntax: TimeStamp Read-only Specifies the time stamp when the upgrade step is
performed.
brcdSwPackageUpgradeResu
ltDescription
brcdIp.1.1.2.16.1.5.1.5
Syntax: DisplayString Read-only Contains the summary description for the particular
image upgrade.
NOTE: The result description is empty when
brcdSwPackageLoadResultStatus is “ok”.
Name, OID, and syntax Access Description
brcdSwIntfModAutoUpgradeM
ode
brcdIp.1.1.2.16.1.2.1
Syntax: Integer Read-write Specifies the mode of an LP auto-upgrade. The following
values can be written:
•
unknown(1)
•
disabled(2)
•
tftp(3)
•
slot1(4)
•
slot2(5)
brcdSwIntfModAutoUpgradeTf
tpAddrType
brcdIp.1.1.2.16.1.2.2
Syntax: InetAddressType Read-write Specifies the IP address type of a TFTP server. The
following address types are supported:
•
ipv4(1)
•
ipv6(2)
brcdSwIntfModAutoUpgradeTf
tpAddr
brcdIp.1.1.2.16.1.2.3
Syntax: InetAddress Read-write Specifies the IP address of a TFTP server for
auto-upgrade.