Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 411)

Unified IP MIB Reference 383
53-1002549-02
TM CPU VOQ statistics table
TM CPU VOQ statistics table
The Traffic Manager CPU VOQ statistics table contains the CPU queue-related statistics. Use the
show tm-voq-stat src_port [ethernet | pos] <slot/port> cpu-queue | cpu-copy-q [ | all] CLI
command for information about the Traffic Manager (TM) CPU queue-related statistics.
NOTE
The following table contains information about the Traffic Manager (TM) CPU queue-related
statistics on the NI-MLX-1Gx48-T, NI-MLX-1Gx24, NI-MLX-10Gx8, BR-MLX-100Gx2, and all the POS
modules.
brcdTMMcastStreamQStatsQSize
brcdIp.1.14.2.2.5.1.17
Syntax: Counter64 Read-only Shows the current size of the queue.
brcdTMMcastStreamQStatsCreditCount
brcdIp.1.14.2.2.5.1.18
Syntax: Counter64 Read-only Shows the current credit count of the queue.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdTMCpuQStatsTable
brcdIp.1.14.2.2.6 None The Traffic Manager CPU VOQ statistics table.
brcdTMCpuQStatsSlotId
brcdIp.1.14.2.2.6.1.1
Syntax: Unsigned32 None Shows the slot ID of the LP module that uniquely
identifies a line card. The LP module must be physically
present and operationally up.
brcdTMCpuQStatsTMDeviceId
brcdIp.1.14.2.2.6.1.2
Syntax: Unsigned32 None Shows the TM device ID that uniquely identifies the
Network Processor TM within a line card in the system.
brcdTMCpuQStatsType
brcdIp.1.14.2.2.6.1.3
Syntax: Integer None Shows the type of the CPU queue:
•
CpuQ(1) - This queue contains the packets that do
not fall under any of the following categories.
•
CpuCopyQ(2) - This queue contains the packets
related to SA learning, sFlow, RPF Log, ACL Log,
and so on.
•
CpuManagementQ(3) - This queue contains the
CPU management packets.
•
CpuProtocolQ(4) - This queue contains the CPU
protocol packets.
brcdTMCpuQStatsPriority
brcdIp.1.14.2.2.6.1.4
Syntax: PriorityTC None Shows the priority of the packets that is stored in the
queue. This is a 1-based index. The priority0 maps to 1,
priority1 maps to 2, and so on.
brcdTMCpuQStatsDescription
brcdIp.1.14.2.2.6.1.5
Syntax: DisplayString Read-only Shows the range of ports serviced by
brcdTMCpuQStatsTMDeviceId.
brcdTMCpuQStatsEnquePkts
brcdIp.1.14.2.2.6.1.6
Syntax: Counter64 Read-only Shows the count of all packets entering ingress queues
on the TM.