Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 608)

580 Unified IP MIB Reference
53-1002549-02
LAG group port table
LAG group port table
The following table list the MIB objects of LAG group port table.
fdryLinkAggregationGroupTrunkType
brcdIp.1.1.3.33.1.1.1.6
Syntax: Integer Read-create Displays the trunk connection type, which specifies the
scheme of load-sharing among the trunk ports.
fdryLinkAggregationGroupTrunkThresh
old
brcdIp.1.1.3.33.1.1.1.7
Syntax: Unsigned32 Read-create DIsplays the number of up ports needed to keep the
trunk up.
NOTE: This object is not applicable to keepalive LAGs.
fdryLinkAggregationGroupLacpTimeout
brcdIp.1.1.3.33.1.1.1.8
Syntax: Integer Read-create Displays the LACP timeout value this LACP LAG will use.
Applicable for dynamic and keepalive LAGs only.
fdryLinkAggregationGroupIfIndex
brcdIp.1.1.3.29.2.1.1.9
Syntax: InterfaceIndex Read-only After a LAG is deployed, this object dIsplays information
for the LAG entry in the ifTable. Use the variabe to access
the entry in the ifTable and ifXTable. Zero(0) is returned
for LAGs that have not been deployed.
fdryLinkAggregationGroupPortCount
brcdIp.1.1.3.33.1.1.1.10
Syntax: Unsigned32 Read-only Displays the number of member ports that belong to this
LAG.
fdryLinkAggregationGroupRowStatus
brcdIp.1.1.3.33.1.1.1.11
Syntax: RowStatus Read-create Displays the status of this conceptual row.
createAndWait(5) is not supported.
To create a row in this table, a manager must set this
object to createAndGo(4) together with the setting of
fdryLinkAggregationGroupType. After that, the row status
becomes active(1) regardless of whether or not the LAG
entry is deployed.
To deploy the LAG entry, set the corresponding instance
of fdryLinkAggregationGroupAdminStatus to deployActive
or deployPassive.
fdryLinkAggregationGroupId
brcdIp.1.1.3.33.1.1.1.12
Syntax: Unsigned 32 Read-only The numeric identifier assigned to this LAG.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
fdryLinkAggregationGroupPortTable
brcdIp.1.1.3.33.2.1 None This table contains the Link Aggregation Control
Configuration information about every aggregation port
associated with this device. A row is listed in this table for
each physical port.
fdryLinkAggregationGroupPortLacpPrio
rity
brcdIp.1.1.3.33.2.1.1.1
Syntax: Integer Read-write The LACP priority value assigned to this link aggregation
port.
valid values: 0 - 65535
Default: 1.