Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 164)

136 Unified IP MIB Reference
53-1002549-02
Default gateway IP address
Default gateway IP address
The following table lists the MIB object for the default gateway IP address.
Configuration notes
When using the snAgGblPassword object in a Set operation, the following must be considered:
snAgCfgLoad
(continued) The following values may be read:
•
normal(1)
•
flashPrepareReadFailure(2)
•
flashReadError(3)
•
flashPrepareWriteFailure(4)
•
flashWriteError(5)
•
tftpTimeoutError(6)
•
tftpOutOfBufferSpace(7)
•
tftpBusy(8)
•
tftpRemoteOtherErrors(9)
•
tftpRemoteNoFile(10)
•
tftpRemoteBadAccess(11)
•
tftpRemoteDiskFull(12)
•
tftpRemoteBadOperation(13)
•
tftpRemoteBadId(14)
•
tftpRemoteFileExists(15)
•
tftpRemoteNoUser(16)
•
operationError(17)
•
loading(18)
•
tftpWrongFileType(29)
•
operationDoneWithNMS(28)
•
tftpWrongFileType(29)
•
downloadToDramFromServerOverwrite(30)
The objects “snAgCfgFname” and “snAgTftpServerIp” are required to
allow the download or upload process to occur.
No write requests is allowed while a download or upload process is in
progress.
The snAgCfgEosTable objects must be sent along in one PDU for
network management systems to recognize values from (24) to (27).
A separate write memory using the CLI or an SNMP “set
snAgWriteNVRAM” is required to save the configuration to NVRAM.
This object requires a password to be set for the snAgGblPassword
object.
NOTE: The snAgTftpServerIp object is deprecated by the
snAgTftpServerAddrType object and the snAgTftpServerAddr
object supports both IPv4 and IPv6.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snAgDefGwayIp
brcdIp.1.1.2.1.10
Syntax: Integer Read-write Shows the IP address of the default gateway router.