Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 546)

518 Unified IP MIB Reference
53-1002549-02
OSPF redistribution of routes table
OSPF redistribution of routes table
The OSPF redistribution of routes table contains a list of routes that will be used to decide whether
a particular RIP or static route is to be imported into an OSPF domain. Routes will be imported if the
parameter “Import Route into OSPF” is enabled. They will be imported as external type 2 routes.
NOTE
The following objects in this section are not supported on the Brocade MLXe router, Brocade NetIron
XMR, Brocade NetIron MLX, Brocade NetIron CES, and Brocade NetIron CER series devices.
Name, OID, and syntax Access Description
snOspfRedisTable
brcdIp.1.2.4.6.1 None The OSPF redistribution of routes table contains a list of routes
that could be imported into the OSPF domain.
snOspfRedisIndex
brcdIp.1.2.4.6.1.1.1
Syntax: Integer Read-only An ID identifying this destination route.
There can be up to 64 entries for this object.
snOspfRedisIpAddress
brcdIp.1.2.4.6.1.1.2
Syntax: IpAddress Read-write Shows the destination IP address that is associated with this
particular route.
snOspfRedisMask
brcdIp.1.2.4.6.1.1.3
Syntax: IpAddress Read-write Shows the subnet mask of this route.
snOspfRedisAction
brcdIp.1.2.4.6.1.1.4
Syntax: Integer Read-write Specifies what action to be taken if the route matches this entry:
•
noImport(0) – Do not import the route into the OSPF domain.
•
import(1) – Import the route into the OSPF domain as an
external type 2 route.
snOspfRedisProtocol
brcdIp.1.2.4.6.1.1.5
Syntax: Integer Read-write Specifies how routes are imported into the OSPF domain:
•
rip(1) – The RIP route.
•
all(2) – All protocol route.
•
static(3) – The static route.
•
bgp(4) – The BGP route.
•
connected(5) – The connected route.
•
isis(6) – The IS-IS route.
snOspfRedisSetOspfMetric
brcdIp.1.2.4.6.1.1.6
Syntax: Integer Read-write The value indicates whether the route metric matches the OSPF
metric field:
•
disabled(0) – The route metric does not match the OSPF
metric field.
•
enabled(1) – The route metric matches the OSPF metric field.
snOspfRedisOspfMetricValue
brcdIp.1.2.4.6.1.1.7
Syntax: Integer Read-write Specifies the cost of using this Type of Service (TOS) on this
interface.
Valid values: 0 – 65535.
snOspfRedisMatchRipMetric
brcdIp.1.2.4.6.1.1.8
Syntax: Integer Read-write The value indicates whether the route metric matches the RIP
metric field:
•
disabled(0) – The route metric does not match the RIP metric
field.
•
enabled(1) – The route metric matches the RIP metric field.