Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 501)

Unified IP MIB Reference 473
53-1002549-02
BGP4 general variables
snBgp4GenMaxNeighbors
brcdIp.1.2.11.1.15
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the maximum number of neighbors that can be
configured in a BGP peer group.
snBgp4GenMinNeighbors
brcdIp.1.2.11.1.16
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the minimum number of neighbors that can be
configured in a BGP peer group.
snBgp4GenMaxRoutes
brcdIp.1.2.11.1.17
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the maximum number of configured routes.
snBgp4GenMinRoutes
brcdIp.1.2.11.1.18
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the minimum number of configured routes.
snBgp4GenMaxAddrFilters
brcdIp.1.2.11.1.19
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the maximum number of configured BGP4 address
filters.
Name, OID, and syntax Access Description