Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 302)

274 Unified IP MIB Reference
53-1002549-02
NP statistics table
brcdNPStatsRxUnicastPkts
brcdIp.1.14.2.1.1.6
Syntax: Counter 64 Read-only Shows the number of unicast packets received.
brcdNPStatsRxBroadcastPkts
brcdIp.1.14.2.1.1.7
Syntax: Counter 64 Read-only Shows the number of broadcast packets received.
brcdNPStatsRxMulticastPkts
brcdIp.1.14.2.1.1.8
Syntax: Counter 64 Read-only Shows the number of multicast packets received.
brcdNPStatsRxSendtoTMPkts
brcdIp.1.14.2.1.1.9
Syntax: Counter 64 Read-only Shows the number of packets sent to the Traffic
Manager (TM).
brcdNPStatsRxBadPkts
brcdIp.1.14.2.1.1.10
Syntax: Counter 64 Read-only Shows the number of bad packets received.
brcdNPStatsRxLookupUnavailable
brcdIp.1.14.2.1.1.11
Syntax: Counter 64 Read-only Shows the number of packets dropped due to
unavailability of the CAM interface for packet lookups.
brcdNPStatsRxACLDrop
brcdIp.1.14.2.1.1.12
Syntax: Counter 64 Read-only Shows the number of ACL drops on the ingress path.
brcdNPStatsRxPriority0And1Drop
brcdIp.1.14.2.1.1.13
Syntax: Counter 64 Read-only Shows the number of packets dropped based on
priority 0 and 1 on the ingress path.
brcdNPStatsRxPriority2And3Drop
brcdIp.1.14.2.1.1.14
Syntax: Counter 64 Read-only Shows the number of packets dropped based on
priority 2 and 3 on the ingress path.
brcdNPStatsRxPriority4And5Drop
brcdIp.1.14.2.1.1.15
Syntax: Counter 64 Read-only Shows the number of packets dropped based on
priority 4 and 5 on the ingress path.
brcdNPStatsRxPriority6And7Drop
brcdIp.1.14.2.1.1.16
Syntax: Counter 64 Read-only Shows the number of packets dropped based on
priority 6 and 7 on the ingress path.
brcdNPStatsRxSuppressRPFDrop
brcdIp.1.14.2.1.1.17
Syntax: Counter 64 Read-only Shows the number of suppressed RPF drops on the
ingress path due to ACL override.
brcdNPStatsRxRPFDrop
brcdIp.1.14.2.1.1.18
Syntax: Counter 64 Read-only Shows the number of RPF drops on the ingress path.
brcdNPStatsRxIPv4Pkts
brcdIp.1.14.2.1.1.19
Syntax: Counter 64 Read-only Shows the number of packets that have IPv4 EType
(0x0800) and IP version (0x4).
brcdNPStatsRxIPv6Pkts
brcdIp.1.14.2.1.1.20
Syntax: Counter 64 Read-only Shows the number of packets that have IPv6 EType
(0x86DD) and IP version (0x6).
Name, OID, and syntax Access Description