beautypg.com

Sntrapsfmaccesserror, Sntrapsfmstatuschange, Np buffer error notifications – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 718

background image

690

Unified IP MIB Reference

53-1002549-02

Proprietary traps

NP buffer error notifications

The following table contains Network Processor (NP) buffer error notifications that are supported
only on the Brocade NetIron CES and Brocade NetIron CER series devices.

snTrapSFMLinkUp
brcdIp.0.1101

snAgGblTrapMessage

Informational

A link from the LP Traffic Manager to an
SFM Fabric Element is up.
Sample trap message:
Fabric Monitoring Link Up :

SFM /FE /Link ,

LP /TM

snTrapSFMAccessError
brcdIp.0.1102

snAgGblTrapMessage

Major

This trap is generated when the system
fails to access an SFM Fabric Element.
Sample trap message:
Health Monitoring: FE

accessfailure on SFM /FE

snTrapSFMStatusChange
brcdIp.0.1103

snAgentBrdIndex,
snAgentBrdModuleSt
atus,
snAgGblTrapMessage

Notification

The SNMP notification that is generated
when there is a change in the operational
state of the Switch Fabric Module (SFM).
NOTE: For 100G modules, the string

SNM5/FE1/Link16 ->
LP15/TM1/Link4 is changed to
SNM5/FE1/Link16 ->
LP15/FE1/Link4 in syslog or TM
log or in trap.

Sample trap message:
System: Health Monitoring: SFM

powered off due to

failure detection

Trap name and number

Varbinds

Severit
y

Description

brcdNPBufferErrorIngressThr
esholdExceeded
brcdIp.1.14.2.0.1

brcdNPBufferErro
rDescription,
brcdNPBufferErro
rIngressCurrentE
vents

Alerts

The SNMP trap is generated when the NP ingress
buffer error event count within a window exceeds
the configured threshold value.
Sample trap message:
Brocade Trap: NP ingress buffer has

11 error events, exceeding

configured threshold for interfaces

1/1 to 1/24.

brcdNPBufferErrorEgressThre
sholdExceeded
brcdIp.1.14.2.0.2

brcdNPBufferErro
rDescription,
brcdNPBufferErro
rEgressCurrentEv
ents

Alerts

The SNMP trap is generated when the NP egress
buffer error event count within a window exceeds
the configured threshold value.
Sample trap message:
Brocade Trap: NP egress buffer has 11

error events, exceeding configured

threshold for interfaces 1/1 to 1/24.

Trap name and number

Varbinds

Severity

Description and trap message