Brcdmctclusterpeerdownreaso n – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 455
Unified IP MIB Reference
427
53-1002549-02
MCT cluster peer table
brcdMctClusterPeerDownReaso
n
brcdIp.1.1.12.1.1.4.1.10
Syntax: Integer
Read-only
The reason for the brcdMctClusterPeerOperStatus object to be
in the ccpDown(3) state.
The following values are supported as the down reason:
•
none(1)—Indicates the peer is not in the down state.
•
loopbackInterfaceDown(2)—Indicates the loopback
interface is down.
•
iclInterfaceDown(3)—Indicates the ICL interface is down.
•
upgradeInProgress(4)—Indicates graceful upgrade is in
progress.
•
routeNotAvailable(5)—Indicates the route to the cluster
peer is not available.
•
iclVeDown(6)—Indicates the ICL VE interface is down.
•
rBridgeIdMismatch(7)—Indicates the remote bridge ID
does not match with the peer.
•
clusterIdMismatch(8)—Indicates the cluster ID does not
match with the peer.
•
keepAliveTimeMismatch(9)—Indicates the keepalive time
does not match with the peer.
•
holdTimeMismatch(10)—Indicates the hold time does not
match with the peer.
•
fastFailoverMismatch(11)—Indicates the fast failover
parameter does not match with the peer.
•
shutdownMesgFromPeer(12)—Indicates a shutdown
message is received from the peer.
•
tcpKeepAliveTimeout(13)—Indicates a TCP keepalive
timeout message is received.
•
tclConnCloseMesg(14)—Indicates a TCP connection close
message is received.
•
holdTimeoutExpired(15)—Indicates the hold timeout is
expired.
•
sendStateTimeoutExpired(16)—Indicates the transmission
state timeout is expired.
•
recvStateTimeoutExpired(17)—Indicates the received state
timeout is expired.
•
initMesgSendFail(18)—Indicates failure to send the
initializing message.
•
keepAliveMesgSendFail(19)—Indicates failure to send the
keepalive message.
•
invalidAppMesgRecv(20)—Indicates an invalid application
packet message is received from the peer.
•
badProtocolVersionPktRecv(21)—Indicates a bad protocol
version packet received message from the peer.
•
badPduLengthPktRecv(22)—Indicates a bad PDU length
packet received message from the peer.
•
unknownCcpPktRecv(23)—Indicates an unknown CCP
message type packet received message from the peer.
•
invalidCcpPktRecv(24)—Indicates an invalid CCP message
length packet received message from the peer.
•
internalCcpErrorRecv(25)—Indicates an internal CCP error
message from the peer.
•
ccpTcpCommFail(26)—Indicates a cluster CCP TCP
communication is failed.
Name, OID, and syntax
Access
Description