Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 739)

Unified IP MIB Reference 711
53-1002549-02
Proprietary traps
ADC trap
The following SNMP trap is generated for the ADC feature.
Automatic port deactivation traps
The following traps are generated for the automatic port deactivation feature.
Trap name and number Varbinds Severity Description and trap message
snTrapWirelessIsrpPeerState
Change
brcdIp.0.126
NOTE: This object is not
supported on
Brocade NetIron
MLX, Brocade MLXe,
, Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron CER
series devices.
snAgGblTrapMessage Notification The state of WLAN controller peer has
changed.
Sample trap message:
:N:Mobility Peer
has changed state from
to
snTrapWirelessStationRoami
ngEventTriggered
brcdIp.0.128
NOTE: This object is not
supported on
Brocade NetIron
MLX, Brocade MLXe,
, Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron CER
series devices.
snAgGblTrapMessage Notification A wireless station (client) roamed from or
to the access point that is attached to this
WLAN controller.
Sample trap message:
:N:Station
<0009.5b66.eac6> has roamed
to switch
FES-IP-address>
Trap name and number Varbinds Severity Description and trap message
snTrapPnPStatusChange
brcdIp.0.125
NOTE: This object is not
supported on
Brocade NetIron
MLX, Brocade
MLXe, Brocade
NetIron XMR,
Brocade NetIron
CES, and
Brocade NetIron
CER series
devices.
snAgGblTrapMessage Notification The access point’s ADC status changed.
Sample trap message:
:N:PnP status of AP
MAC address at
port has changed
from to