Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 500)

472 Unified IP MIB Reference
53-1002549-02
BGP4 general variables
snBgp4GenHoldTime
brcdIp.1.2.11.1.10
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Determines how many seconds the device will wait for a
keepalive or update message from a BGP4 neighbor before
deciding that the neighbor is dead.
Valid values: 1 – 65535 seconds
Default: 180 seconds
snBgp4GenRouterId
brcdIp.1.2.11.1.11
Syntax: IpAddress
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Indicates the BGP router IP address.
snBgp4GenTableMap
brcdIp.1.2.11.1.12
Syntax: OCTET STRING
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Defines the route map name. Each character of the name is
represented by one octet.
Valid values: Up to 32 octets.
snBgp4GenAdminStat
brcdIp.1.2.11.1.13
Syntax: Integer Read-write Indicates if BGP4 routing is enabled:
•
disabled(0)
•
enabled(1)
snBgp4GenDefaultMetric
brcdIp.1.2.11.1.14
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Indicates the default metric values for the BGP4.
The Layer 3 Switches can redistribute directly connected
routes, static IP routes, RIP routes, and OSPF routes into
BGP4. The MED (metric) is a global parameter that specifies
the cost that will be applied to all routes by default when they
are redistributed into BGP4.
Valid values: 0 – 4294967295
Name, OID, and syntax Access Description