Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 731)

Unified IP MIB Reference 703
53-1002549-02
Proprietary traps
snTrapL4FirewallPathUp
brcdIp.0.49 Minor The Server Load Balancing switch
firewall path is up.
Sample trap message:
firewall path up target
nexthop path port
snTrapL4FirewallPathDown
brcdIp.0.50 Minor The Server Load Balancing switch
firewall path is down.
Sample trap message:
Firewall path down target
nexthop path
port
snTrapL4ContentVerification
brcdIp.0.55 Informational The HTTP match list pattern has been
found.
Sample trap message:
HTTP match-list pattern is
found.
snTrapL4RealServerRespon
seTimeLowerLimit
brcdIp.0.67 snAgGblTrapMessage Warning The real server average response time
exceeded the lower threshold.
Sample trap message:
Port on server
: : Avg
response time has
exceeded lower threshold
snTrapL4RealServerRespon
seTimeUpperLimit
brcdIp.0.68 snAgGblTrapMessage Warning The real server average response time
exceeded the upper threshold.
Sample trap message:
Port on server
: : Avg
response time has
exceeded upper threshold;
Bringing down the port...
snTrapL4TcpAttackRateExce
edMax
brcdIp.0.69 snAgGblTrapMessage Critical The TCP attack rate exceeds the
configured maximum TCP attack rate.
Sample trap message:
L4 TCP Attack Rate Exceed Max
snTrapL4TcpAttackRateExce
edThreshold
brcdIp.0.70 snAgGblTrapMessage Warning The TCP attack rate exceeds 80 percent
of the configured maximum.
Sample trap message:
L4 TCP Attack Rate Exceed Threshold
snTrapL4ConnectionRateExc
eedMax
brcdIp.0.71 snAgGblTrapMessage Critical The Layer 4 connection rate exceeds the
configured maximum.
Sample trap message:
L4 Connection Rate Exceed Max
snTrapL4ConnectionRateExc
eedThreshold
brcdIp.0.72 snAgGblTrapMessage Warning The Layer 4 connection rate exceeds 80
percent of the configured maximum.
Sample trap message:
L4 Connection Rate Exceed
Threshold
Trap name and number Varbinds Severity Description and trap message