Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 154)

126 Unified IP MIB Reference
53-1002549-02
Flash card
Name, OID, and syntax Access Description
snChasFlashCard
brcdIp.1.1.1.1.22
Syntax: Integer32 Read-only Applies only to M4 management modules. This object is a bit array
that contains the flash card status.
This is a packed bit string. The status of each flash card is encoded
into one bit. There can be up to two flash cards.
The bits are:
•
2 to 31 – Reserved
•
1 – Flash card 2 status
•
0 – Flash card 1 status
(Bit 0 is the least significant bit.)
Flash card status can be one of the following:
•
0 – Flash card is absent
•
1 – Flash card is present
snChasFlashCardLeds
brcdIp.1.1.1.1.23
Syntax: Integer32 Read-only Shows the status of LEDs on a flash card. Each bit shows one of the
following:
•
0 – Flash card is off
•
1 – Flash card is on
snChasNumSlots
brcdIp.1.1.1.1.24
Syntax: Integer32 Read-only Shows the number of slots in the chassis.
snChasArchitectureType
brcdIp.1.1.1.1.25
Syntax: Integer Read-only Shows the architecture type:
•
stackable(1) - old stackable
•
bigIron(2)
•
terathon(3)
•
fifthGen(4)
snChasProductType
brcdIp.1.1.1.1.26
Syntax: Integer Read-only Shows the product type. The following shows the meaning of each bit:
•
invalid(0)
•
BigIron MG8(1)
•
NetIron 40G(2)
•
NetIron IMR 640(3)
•
BigIron RX 800(4)
•
Brocade NetIron XMR router 16000(5)
•
BigIron RX 400(6)
•
Brocade NetIron XMR router 8000(7)
•
BigIron RX 200(8)
•
Brocade NetIron XMR router 4000(9)
•
Brocade MLX router-32(13)
•
Brocade NetIron XMR router 32000(14)
•
BigIron RX-32(15)
•
niCES2000Series(16)
•
niCER2000Series(17)
•
brMlxESlot4(18) - This value is supported only on the Brocade
NetIron devices.
•
brMlxESlot8(19) - This value is supported only on the Brocade
NetIron devices.
•
brMlxESlot16(20) - This value is supported only on the
BrocadeNetIron devices.
•
brMlxESlot32(21) - This value is supported only on the Brocade
NetIron devices.