Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 264)

236 Unified IP MIB Reference
53-1002549-02
SNTP server table (FastIron X series IPv6 devices)
SNTP server table (FastIron X series IPv6 devices)
The following objects apply to FastIron X series IPv6 devices and it is not supported on the Brocade
NetIron MLX, Brocade MLXe, Brocade NetIron XMR, Brocade NetIron CES, and Brocade NetIron
CER series devices. These objects provide information on the SNTP server.
NOTE
Only in a specific configuration and with IPv4 SNTP servers, SNMP may stop working when the SNTP
server table is viewed. If this occurs, add rfc4001-inetAddressMIB.mib or rfc4001.mib.
Name, OID, and syntax Access Description
fdrySntpServerTable
brcdIp.1.1.7.1.1.1 None The SNTP server table.
fdrySntpServerIndex
brcdIp.1.1.7.1.1.1.1.1
Syntax: Unsigned32 None The index to the SNTP server table. A maximum of three SNTP
servers are supported.
fdrySntpServerAddrType
brcdIp.1.1.7.1.1.1.1.2
Syntax: InetAddressType Read-create The SNTP server IP address type:
•
ipv4(1)
•
ipv6(2)
•
Default: IPv4
fdrySntpServerAddr
brcdIp.1.1.7.1.1.1.1.3
Syntax: InetAddress Read-create The SNTP server IP address.
fdrySntpServerVersion
brcdIp.1.1.7.1.1.1.1.4
Syntax: Integer32 Read-create The SNTP server version.
fdrySntpServerRowStatus
brcdIp.1.1.7.1.1.1.1.5
Syntax: RowStatus Read-create This variable is used to create, modify, or delete a row in the table.
When a row in the table is in active(1) state, no objects in that row
can be modified except the object.