Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 742)

714 Unified IP MIB Reference
53-1002549-02
Proprietary traps
Traps for optics
The following table contains traps that are supported on the Brocade NetIron MLX, Brocade MLXe,
Brocade NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
snTrapErrorDisableAction
brcdIp.0.154
NOTE: This object is not
supported on the
Brocade NetIron MLX,
Brocade MLXe, Brocade
NetIron XMR, Brocade
NetIron CES, and Brocade
NetIron CER series
devices.
ifIndex,
snAgGblTrapMes
sage Notification The SNMP trap that is generated when an
interface error-disable is hit or recovery
times out.
Sample trap message:
Brocade Trap: Error-disable
hit or recovery times out.
snTrapStpRootGuardExpire
brcdIp.0.160
NOTE: This object is not
supported on the
Brocade NetIron MLX,
Brocade MLXe, Brocade
NetIron XMR, Brocade
NetIron CES, and Brocade
NetIron CER series
devices.
ifIndex,
snVLanByPortCfg
VLanId,
snAgGblTrapMes
sage Notification The SNMP trap that is generated when a
port is re-enabled after it has been disabled
because it received a BPDU packet and
BPDU Guard is enabled.
Sample trap message:
Brocade Trap: STP BPDU Guard
Expire.
snTrapPortLoopDetection
brcdIp.0.161 ifIndex,
snVLanByPortCfg
VLanId,
snAgGblTrapMes
sage Notification The SNMP notification is generated when a
port loop is detected.
Sample trap message:
Brocade Trap: LOOP DETECTION:
VLAN , port /
detect, putting into
err-disable state
snTrapSTPRootGuard Violation
brcdIp.0.1204 snAgGblTrapMes
sage Notification The SNMP trap that is generated when STP
Root Guard Violation occurs on a port.
Sample trap message:
Brocade Trap: STP Root Guard
Violation
snTrapRSTPRootGuard Violation
brcdIp.0.1205 snAgGblTrapMes
sage Notification The SNMP trap that is generated when
RSTP Root Guard Violation occurs on a port.
Sample trap message:
Brocade Trap: RSTP Root Guard
Violation
Trap name and number Varbinds Severity Description and trap message