Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 600)

572 Unified IP MIB Reference
53-1002549-02
DOS attack statistics
DOS attack statistics
The following objects provide denial of service (DOS) attack statistics through SNMP.
DOS attack port table
The following objects have been created to filter traffic for DOS-attacks through SNMP.
NOTE
The DOS attack port MIBs are supported on the Brocade NetIron MLX, Brocade MLXe, and Brocade
NetIron XMR devices.
Name, OID, and syntax Access Description
snQosBindTable
brcdIp.1.1.3.14.2 None The QoS bind table.
snQosBindIndex
brcdIp.1.1.3.14.2.1.1
Syntax: Integer Read-only The table index of the QoS Bind.
snQosBindPriority
brcdIp.1.1.3.14.2.1.2
Syntax: Integer32 Read-only Shows the QoS bind priority.
snQosBindProfileIndex
brcdIp.1.1.3.14.2.1.3
Syntax: Integer Read-write An index that serves as a pointer to the index of the
“snQosProfileTable” .
Name, OID, and syntax Access Description
snDosAttackICMPDropCount
brcdIp.1.1.3.14.3.1.1
Syntax: Counter32 Read-only Provides the contents of the ICMP drop counter.
snDosAttackICMPBlockCount
brcdIp.1.1.3.14.3.1.2
Syntax: Counter32 Read-only Provides the contents of the ICMP block counter.
snDosAttackSYNDropCount
brcdIp.1.1.3.14.3.1.3
Syntax: Counter32 Read-only Provides the contents of the SYN drop counter.
snDosAttackSYNBlockCount
brcdIp.1.1.3.14.3.1.4
Syntax: Counter32 Read-only Provides the contents of the SYN block counter.