Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 523)

Unified IP MIB Reference 495
53-1002549-02
BGP4 route map match table
The BGP4 route map set table describes the route map set MIB objects.
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
snBgp4RouteMapMatchAddressPrefixL
ist
brcdIp.1.2.11.13.1.1.14
Syntax: OCTET STRING Read-write Indicates the prefix list that must match a BGP address
access list.
Valid values: Up to 170 octets.
snBgp4RouteMapMatchNextHopAcces
sList
brcdIp.1.2.11.13.1.1.15
Syntax: OCTET STRING Read-write Indicates the ID of the next-hop router that this route
must match.
This is an integer from 1 through 0xFFFFFFFF, consisting
of five integers. Each integer has two octets.
snBgp4RouteMapMatchNextHopPrefix
List
brcdIp.1.2.11.13.1.1.16
Syntax: OCTET STRING Read-write Indicates the prefix list of the next-hop router that this
route must match.
Valid values: Up to 170 octets.
Name, OID, and syntax Access Description
snBgp4RouteMapSetTable
brcdIp.1.2.11.14.1 None The BGP4 route map set table.
snBgp4RouteMapSetMapName
brcdIp.1.2.11.14.1.1.1
Syntax: OCTET STRING Read-only An octet string of the route map name; each character of the
name is represented by one octet.
snBgp4RouteMapSetSequenceNu
m
brcdIp.1.2.11.14.1.1.2
Syntax: Integer32 Read-only A sequence number for this particular route map.
snBgp4RouteMapSetAsPathType
brcdIp.1.2.11.14.1.1.3
Syntax: Integer Read-write Modifies an autonomous system path for BGP routes:
•
tag(0) - Converts the tag of a route into an autonomous
system path.
•
prepend(1) - Appends the string from
snBgp4RouteMapSetAsPathString to the AS-Path of
the route that is matched by the route map.
snBgp4RouteMapSetAsPathString
brcdIp.1.2.11.14.1.1.4
Syntax: OCTET STRING Read-write This AS-Path string is used only if
snBgp4RouteMapSetAsPathCmd was sent together with the
value set to prepend(1).
snBgp4RouteMapSetAutoTag
brcdIp.1.2.11.14.1.1.5
Syntax: Integer Read-write Enables or disables the automatic tag for BGP routes.
snBgp4RouteMapSetCommunityTy
pe
brcdIp.1.2.11.14.1.1.6
Syntax: Integer Read-write Sets the BGP communities attribute:
•
None - No other community attributes are allowed.
•
Nums - Allows community attributes.
Name, OID, and syntax Access Description