Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 81)

Unified IP MIB Reference 53
53-1002549-02
draft-ietf-idr-bgp4-mibv2-12 MIB
BGP4v2 per-peer event times table
The following table contains the BGP4v2 per-peer event times-related objects.
NOTE
The following table is supported only on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron
XMR, and Brocade NetIron CER series devices and it is not supported on the Brocade NetIron CES
2000 series BASE Packages device.
bgp4V2PeerLastErrorCodeSent
brcdIp.3.5.1.1.3.1.6
Syntax: Unsigned32 Read-only Specifies the last error code sent to the peer through a
notification message on the connection. The field is zero(0), if
no error occurs.
bgp4V2PeerLastErrorSubCodeSent
brcdIp.3.5.1.1.3.1.7
Syntax: Unsigned32 Read-only Specifies the last error subcode sent to the peer through a
notification message on the connection. The field is zero(0), if
no error occurs.
bgp4V2PeerLastErrorSentTime
brcdIp.3.5.1.1.3.1.8
Syntax: TimeStamp Read-only Indicates the time stamp when the last notification is sent to
the peer.
bgp4V2PeerLastErrorSentText
brcdIp.3.5.1.1.3.1.9
Syntax: SnmpAdminString Read-only Specifies the implementation-specific explanation of the error
reported.
bgp4V2PeerLastErrorSentData
brcdIp.3.5.1.1.3.1.10
Syntax: Octet String
NOTE: This object is not supported
on Brocade NetIron MLX,
Brocade MLXe, Brocade
NetIron XMR, Brocade
NetIron CES, and Brocade
NetIron CER series devices
Read-only Specifies the data of the last error code sent to the peer.
As per RFC 2578, some implementations have limitations
dealing with Octet Strings that are larger than 255. So, the
data is truncated.
Name, OID, and syntax Access Description
bgp4V2PeerEventTimesTable
brcdIp.3.5.1.1.4 None A table reporting the per-peering session amount of time
elapsed and update events while the peering session
advanced into the established state.
bgp4V2PeerFsmEstablishedTime
brcdIp.3.5.1.1.4.1.1
Syntax: Gauge32 Read-only Indicates how long (in seconds) the peer has been in the
established state or how long since the peer was last in the
established state. The value of the object is set to zero(0)
when a new peer is configured or when the router is booted.
The value remains zero if the peer has never reached the
established state.
bgp4V2PeerInUpdatesElapsedTime
brcdIp.3.5.1.1.4.1.2
Syntax: Gauge32 Read-only Indicates the elapsed time (in seconds) since the last BGP
update message was received from the peer. The value of the
object is set to zero(0) each time bgpPeerInUpdates is
incremented.
Name, OID, and syntax Access Description